Power supply and alarm unit БПС-21М3
Data on equipment
- generation of supply voltage for gas analyzers ДАТ-М, ДАХ-М, ДАК, ДАМ, ДАФ-М
- data exchange via RS485 digital channel
- generation of light alarm
- ambient temperature from +1 to +50°
- designed for mounting on rails of versions ТН35-7,5 and ТН35-15 according to ГОСТ РМЭК 607-15-2003 (DIN-rails)
- ability to connect actuators via an intrinsically safe circuit
- calibration interval - 12 months
- Description
- Characteristics
- Documentation
- Certificates
Description
Used as devices for power supply, alarm, intrinsically safe barriers, controllers for data retrieval in combination with remote detectors of various types that can be installed both in non- and explosion hazardous areas.
Operation mode - continuous.
Operating position - vertical.
Application:
- generation of supply voltage, including intrinsically safe one, for gas alarms ДАТ-М, ДАХ-М, ДАК, ДАМ, potentiometric analyzers of ion activity АП430-02 and other compatible devices
- integration into ACSTP systems (automatic control system of technological process) via Ethernet interface (КСД module)
- data exchange with connected devices via RS485 digital channel, including transfer of measurement information to external devices
- archiving of received data, events and readings (КСД module)
- possibility to connect actuating devices, depending on versions (switching unit К)
- Generation of light alarm when values exceed/drop below the set threshold values (Threshold 1, Threshold 2, Threshold 3) along with simultaneous switching of “dry” relay contacts
- КСД module is designed for gathering data from alarm-sensors ДАТ-М-06 ИБЯЛ.413216.044-05, sensors of gas analyzers ДАХ-М-06 ИБЯЛ.413412.005-05, gas analyzers-sensors ДАК ИБЯЛ.418414.071-17 ...-21, photoionization gas analyzers-sensors ДАФ-М when connected to a loop
Units are designed for mounting on rails of versions ТН35-7,5 and ТН35-15 according to ГОСТ РМЭК 607-15-2003 (DIN-rails).
*БПС-21М3-24х24-iаIIС-К – if consumption current value of connected actuating device is 3 or 70 mA.
*БПС-21М3-24х24-iаIIС-К – if consumption current value of connected actuating device is 3 or 70 mA.
Distinctive features
- possibility to configure complex gas analysis systems using detectors for various gases and of various explosion protection degrees (Exd, ib, ia)
- construction of system with combined configuration of detectors wiring (шлейфовая-лучевая)
- intrinsically safe barrier of circuit ia, ib, ic
- easy to mount onto facepiece (enclosure on DIN-rail)
- data archiving, possibility to connect portable data carrier
- possibility to connect actuating devices through intrinsically safe mains (when using switching unit К)
- full compliance with normative base of the Russian Federation and Customs union
- functional safety integrity level SIL 3
Controller of data retrieval (КСД) ensures preservation of information via RS485 communication channel of the devices. Functional capabilities of controller of data retrieval КСД:
- archiving of measurement results
- issuing of commands to connected units of any other modification for setting of threshold values and range of physical quantity measurement for sensors;
- Retention of parameters of connected sensors:
- alarm actuation thresholds Threshold 1-2-3
- units of measurement
- analyte
- initial and finite values of indicating range
Units БПС-21М3-24-КСД, БПС-21М3-24-КСД-Р allow to record data
- of recent 10 days with interval of 1 minute if maximum quantity of devices is connected (30 at most);
- of recent 30 days with interval of 1 minute if maximum 10 devices are connected;
Documentation
Certificates
